Fri

13

Jul

2012

Juniper Ex4200 Inter Vlan Routing












Juniper ex4200 inter vlan routing

How to configure routed VLAN interfaces (RVI) for inter-vlan routing on the EX switch Virtual Chassis technology, read the white paper. Inter-vlan routing is something that doesn't occur on the M&T series routers. Dear Friends, Please help me in resolving the issue facing during implementing inter-vlan routing between vlans configured on two EX4200 switches connected through.

To: 'juniper-nsp' Subject: [j-nsp] EX4200 VC odd routing issues EX4200-24T X2 (VC) Layer3 Inter VLAN routing with Juniper. Inter-VLAN routing is routing between VLANs within the same device.

Inter vlan routing juniper

Yes - Its A router - set vlans vlan110 vlan-id 110 set vlans vlan110 l3-interface vlan.110 set vlans vlan111 vlan-id 111 set vlans vlan111 l3-interface vlan.111 port as trunk port or using the ?voip vlan? feature. There are 3 inter-VLAN routing device options: layer 3 multilayer Catalyst switch; external router that allows trunking (router-on-a-stick) external router with enough. MTU consideration for inter-vlan routing with jumbo frames on EX-series switches. Inter-VLAN routing is routing between VLANs within the same device. Guys, I am setting the Inter-vlan routing for IPv6 vlan 1.

How to configure routed VLAN interfaces (RVI) for inter-vlan routing on the EX switch Dear Friends, Please help me in resolving the issue facing during implementing inter-vlan routing between vlans configured on two EX4200 switches connected through. I have a requirement to route between two hosts on the same switch (Junos10, ex3200) that are on different vlans. So as of now I run two clustered Juniper SRX650's and two Juniper EX8200 switches together meshed via OSPF. The SRX cluster handles our BGP, ipsec, nat and other. I have configured the vlan interfaces and IPv4 intervlan routing is working fine on Juniper M10i router. All that is needed to be done to have inter-vlan routing on a j-series router is to setup both those vlan's on an.

Inter vlan routing juniper srx

Juniper Networks ® SrX Series Services gateways for the. Layer 3 interfaces called routed VLAN interfaces (or integrated routing. I apologize for not having much knowledge with the Screen-os nor the new Junos. Inter-vlan routing is something that doesn't occur on the M&T series routers.

I have two vlans configured vlan.1(970) and vlan.2(969)--- I have. There are 3 inter-VLAN routing device options: layer 3 multilayer Catalyst switch; external router that allows trunking (router-on-a-stick) external router with enough. So as of now I run two clustered Juniper SRX650's and two Juniper EX8200 switches together meshed via OSPF. The SRX cluster handles our BGP, ipsec, nat and other. Any thoughts or opinions on replacing a Layer 3 core switch that is currently routing 6 VLAN's, with the 16 ports on the SRX 240.
The fact that its stateful

Extensions for IPv6 Inter-Domain routing



Write a comment

Comments: 0

  • loading